L’ultimo arrivato a casa InsideCode a far compagnia alla coppia di Arduino UNO e Arduino DUE è una fiammante OlinuXino A13 wifi board della casa Bulgara Olimex.
Questa Board supporta, oltre alla programmazione diretta Bare Metal (no OS), varie distribuzioni di linux come Ubuntu, Fedora e Debian ed il sistema operativo Android, dotata di cpu Cortex A8 da 1ghz, scheda grafica integrata, wifi, vga, 4 usb host, 1 otg usb, audio in/out e 50 GPIO ed il supporto per display LCD touchscreen, è senza alcun dubbio la rivale numero 1 dei Raspberry lovers 😀
Progetti in cui sto utilizzando questa scheda: SaGa project – BomberMan
A breve pubblicherò delle immagini Android modificate e compilate appositamente per questa scheda.
Di seguito le caratteristiche dal sito ufficiale:
- A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
- 512 MB RAM (2 x 256Mbit x 8)
- 6-16VDC input power supply, noise immune design
- 4GB NAND flash
- 3 + 1 USB hosts, 3 available for users 1 for WIFI RTL8188CU 802.11n 150Mbit module on-board
- 1 USB OTG which can power the board
- Battery option and connector
- Android OS ready to use in the NAND memory
- SD-card connector for booting optional Linux image
- VGA video output
- LCD signals available on connector so you still can use LCD if you diasble VGA/HDMI
- Audio Output
- Microphone Input
- 4 Mount holes
- RTC PCF8536 on board for real time clock and alarms
- 5 Keys on board for android navigation
- UEXT connector for connecting addtional UEXT modules like Zigbee, Bluetooth, Relays, etc
- GPIO connector with 68/74 pins and these signals:
- 17 for adding another NAND flash;
- 22 for connecting LCDs;
- 20+4 including 8 GPIOs which can be input, output, interrupt sources;
- 3x I2C;
- 2x UARTs;
- SDIO2 for connecting SD cards and modules;
- 5 system pins: +5V, +3.3V, GND, RESET, NMI
- Dimensions: 120 x 120 mm (4.7×4.7”)
- Optional low-cost 7″ LCD with touchscreen